1st Gen PSW7 Series Pure Sine Wave Inverter, Charger


♦ On Inverter

• High overload ability up to 300% rated power(20 sec.).

• Low quiescent current, power saver mode

♦ On Battery Charger

• 3- step intelligent battery charging

• Uses PFC(power factor correction) for charger

♦ On Transfer

• 10ms typical transfer time

• 15s delay before transfer when AC resumes

♦ Option

• Battery/AC priority switch Available for off grid solar/wind system

• Auto Generator Starter

• Remote Control

• Battery Temperature Sensor

Feature of PSW7 Series Inverter&Charger
♦ High overload ability of our PSW7 charger is up to 300% rated power(20 sec)

♦ PSW7 pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max.
power from various batteries with different protections, and low voltage trip can be selected (9.5V/10V or 10V/10.5V).

♦ Uses PFC(power factor correction) for charger, which has less power consumption than  conventional units.

♦ It has 15s delay before transfer when AC resumes, and overload protection when our PSW7 pure sine wave inverter equips with generator.
♦ 10ms typical transfer time between battery and AC, which guarantees power continuity of PSW7 charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
♦ Our PSW7 charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp.
♦ It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.

♦ LCD status display, battery/AC priority switch, USB communication port are available for our PSW7 pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting,and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.