Can-Breeze Micro Data Center

[restabs alignment=”osc-tabs-left” responsive=”false” seltabcolor=”#81d742″] [restab title=”Overview” active=”active”]

CAN-BREEZE in rack cooling system is a direct-cooled server cabinet consisting from a lateral cooling device as an indoor unit and an AC outdoor unit. The cooling system provides energy-efficient cooling by latest inverter technology. The cooling capacity and so that the power consumption adapt to the actual costs incurred heat load.

The Side Cooling Rack has close loop system, thus, there is no air leakage between internal air and room air. The noise level is due to the extremely quiet internal side cooling unit is very low and is only about 49 dB(A). These values are below the usual noise in offices. The preparation and installation of the product is very simple.

The outdoor unit can be mounted to a facade wall, placed on a flat roof or on the ground. The Side Cooling Rack’s cooling capacity is available in range between 3,2kW and 14 kW. The internal side cooling unit blows cold air into the front of the 19” mounted devices and collects the hot air from back. Blank (unused) units should be closed with 19 “ blanking panels in order to prevent the cold air short-circuit. The internal side cooling unit has a condensate water pan. Condensed water is collected in the pan, and drained away by drainage hose (customer supplied).

[/restab] [restab title=”Configuration”]• Extruded Aluminum frame chassis up to 2000 kg
• IP Protection : IP54
• Tempered glass front door with swing handle multi-point lock
• Solid rear door with swing handle multi-point lock
• Special polyurethane gasketing on doors and panels to ensure IP protection
• Deflectors to guide cold air from the AC unit to the front of the rack
• Solid removable side panels
• Bottom sheet with adjustable IP protected cable entry
• 2 pairs of depth adjustable heavy duty 19” mounting rails
• 2 pairs of adjustable feet
• Color RAL7035 or RAL 9005
• RoHS compliant, UL certified[/restab] [restab title=”Specification”]
Material Frame; Anodized aluminum extrusion profiles. Other parts : 1,2 and 2 mm steel
Color RAL 7035 or RAL 9005
Compliance RoHS, UL Certified
Maximum Static Load Up to 2000 kg.
Finish Doors, side panels, top and bottom covers: Electrostatic Powder Paint
19” mounting rails: Zinc-plated
Related Accessories Cable Organizer, Blanking Panels, Cable Channel

.[/restab] [restab title=”Datasheet”]CanBreeze Datasheet

Canbreeze catalogue.[/restab][/restabs]